Welcome! If this is your first visit, you will need to register to participate.

DO NOT use symbols in usernames. Doing so will result in an inability to sign in & post!

If you cannot sign in or post, please visit our Forum Talk section for answers to frequently asked questions.

Announcement

Collapse
No announcement yet.

USING PD-120 PADS WITH TD-7 MODULE

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • USING PD-120 PADS WITH TD-7 MODULE

    Hello,

    I have just purchased my first PD-120 pad but am still using the Roland TD-7 to drive my kit.

    I was looking for some advice on setting the basic sensitivity parameters for the PD-120 through the TD-7. For example, how should the minimum velocity be set relative to the maximum velocity? What about the threshold setting? etc.etc.

    Any help would be appreciated, thanks!

    Lenin

  • #2
    I would advice you to use the automatic trigger adjustment on the td-7 (strike three times loud, three times less loud and three times soft).

    Realize that the trigger settings on the td-7 aren't fine-tuned for the pd-120 pads (these pads just weren't there when the td-7 was hot) and the td-7 had enough problems triggering foreign pads itselve.
    Robert

    Comment

    Working...
    X