Cross Stick Threshold on TD20

[beeboy]

Hi There

I have a PD105 on the Aux1 input with the TD20 module. Under the advanced Trigger Parameters (Pg 49 of the Owners manual). I have the 3 way trigger parameters on. I can adjust the xstick threshold on my PD125 snare thats in the snare input, but not on my PD105 thats on the Aux1 input, what have I missed:

Thanks
Ian

[bogiesbad]

Hi There

I have a PD105 on the Aux1 input with the TD20 module. Under the advanced Trigger Parameters (Pg 49 of the Owners manual). I have the 3 way trigger parameters on. I can adjust the xstick threshold on my PD125 snare thats in the snare input, but not on my PD105 thats on the Aux1 input, what have I missed:

Thanks
Ian

Try turning the three-way off? The xstick works from two piezos while the three-way works with a piezo and a FSR switch and requires two inputs. The PD105 has two piezos.

[beeboy]

Turned the 3 way triggering off, no different

[stickinthemud]

I messed with my TD20 and as far as I can tell, the AUX channels do not support the Xstick function. I can't get it to work with either the PD125 or PD105, even if the trigger settings specify those pads.

[beeboy]

So the Xstick function only works on the snare (trigger input 2) then.

[BarT]

So the Xstick function only works on the snare (trigger input 2) then.

I think that's probably true for the XStick Thrshld setting and the F5 XSTICK to switch on/off in each kit (although it's not made clear anywhere in the manual). If you had assigned a rim sound marked *X on Page 92, you could use an Xstik sound (127-141) instead if you don't need rim shots. It's odd that the TD-20 really has no rim shot only rim sounds without cross stick.

Three way triggering only refers to bow/bell/edge of the ride on inputs 10/11, so if you leave it off the ride bow or edge may not function correctly.

Bruce