Hi - new member here, unfortunately with a similar problem. My son, 12, has a TD6 and has recently found that the high hat has stopped giving sound - it just sounds like we're hitting a pad of rubber. Help please !!!
DO NOT use symbols in usernames. Doing so will result in an inability to sign in & post!
If you cannot sign in or post, please visit our vBulletin Talk section for answers to vBulletin related FAQs.
Announcement
Collapse
No announcement yet.
TD6 High Hat problem
Collapse
X
-
welcome to the forum! You can find alot of info here....
That said. In your post, you indicated you are having a problem. Because you didn't state you did any troubleshooting, I will assume the same.
It may sound basic, but have you made sure the cable is firmly plugged in at both ends? Again, it seems silly, but it is the root of most problems...
Maybe some more info about your situation could help.*TDW-20* KD-8 w/Iron Cobra single, PD-125, PD-80R, VH-11, PD-8(X3), CY-12R/C, CY-8(X2), older MDS-6 rack with additional lower crossbar for support, Roc 'n' Soc Nitro, ATH-M50 and MDR-7506
Life is a tragedy to those who feel and a comedy to those who think...
-
Thanks for the replies and apologies for the delay in responding....checked all the cables etc. Look ok. The problem is perhaps a little bit more complicated - the sound from Hi-Hat and Cymbals is fine on the headphones but through the speakers it sounds quite low -
Comment
-
blown tweeter? Try playing music through the same speaker.*TDW-20* KD-8 w/Iron Cobra single, PD-125, PD-80R, VH-11, PD-8(X3), CY-12R/C, CY-8(X2), older MDS-6 rack with additional lower crossbar for support, Roc 'n' Soc Nitro, ATH-M50 and MDR-7506
Life is a tragedy to those who feel and a comedy to those who think...
Comment
Comment