Announcement

Collapse
No announcement yet.

Superior drummer 3 no preset for Roland TD-17

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • nycvape
    replied
    I haven't noticed the toms overloading the signals but I'm using an RME usb interface for audio. Maybe consider bringing the levels in SD3 mixer down. and amp higher if possible, or put a mixer in line to Boost the signal before it hits the amp.

    Leave a comment:


  • seanpatsdad
    replied
    Are most of you going to a amp or PA system or just earbuds. I go out of the TD-17 module to a da200s using SD3 and it sounds ok but sometimes it over drives the Toms. Is there a go between the module and amp you guys use or do you mess around with the module setting s at all . IE usb gain adjust any help is appreciated .thanks . John

    Leave a comment:


  • mkok
    replied
    Just use another Roland one and tweak it. You usually have to anyway if you have added any extra Timís or cymbals. Itís really easy to do. The presets just get you started and itís not really a big deal. As I said before the preset is really just note numbers and not trigger settings. These have to be done on the module.

    Leave a comment:


  • timj
    replied
    Still dare 'aint no update for da td17, what up with dat, yall?

    Leave a comment:


  • Chance27
    replied
    Originally posted by seanpatsdad View Post
    I am new to the whole e drum game, I did just get a TD-17 and am trying to run Superior drummer 3.I have it all setup ,it responds to my hits but no sound comes out.What am I doing wrong? Not sure of the setting up of the drum module.Any help will be very much appreciated.Thanks.
    John
    On your computer you need to assign where the audio out is going. More info is needed on your setup.

    Leave a comment:


  • seanpatsdad
    replied
    I am new to the whole e drum game, I did just get a TD-17 and am trying to run Superior drummer 3.I have it all setup ,it responds to my hits but no sound comes out.What am I doing wrong? Not sure of the setting up of the drum module.Any help will be very much appreciated.Thanks.
    John

    Leave a comment:


  • ditto
    replied
    Should be included in next update

    Leave a comment:


  • electrodrummer
    replied
    Originally posted by zwickerkeith View Post
    make everything sounds real.

    Thanks.
    ekits are real (hee hee )

    Leave a comment:


  • mkok
    replied
    Just try one of the other Roland settings. They all tend to be similar. I donít think ps would be a big deal unless you are going for a jazz sound

    Leave a comment:


  • zwickerkeith
    started a topic Superior drummer 3 no preset for Roland TD-17

    Superior drummer 3 no preset for Roland TD-17

    Recently picked up a Roland TD-17 electronic kit that I am using with superior drummer 3. I realize there is no preset for this line of modules and was wondering what preset works best with them?

    My second question would be with no positional sensing in the module would randomizing the hits make for a much more real sound?

    I am using the drums for recording and the end goal is to make everything sounds real.

    Thanks.
Working...
X