Welcome! If this is your first visit, you will need to register to participate.

DO NOT use symbols in usernames. Doing so will result in an inability to sign in & post!

If you cannot sign in or post, please visit our Forum Talk section for answers to frequently asked questions.

Announcement

Collapse
No announcement yet.

TD-15KV - Low input level via USB audio to Garageband

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • TD-15KV - Low input level via USB audio to Garageband

    Hi there - I'm having what I hope is a simple problem with a simple solution that I'm just overlooking. I've been working with this setup for about a month - I've got:

    TD-15KV
    MBP OS X 10.9.2
    Garageband 10.0.2

    Connected via USB, Roland driver is installed, input/output on the Mac set to TD-15, USB Output level set to 100 on the brain. Everything works great except that the audio level being captured in GB is way too low. It's usable if it's a full kit part and I mix it at 100% and take all the other tracks down to 25-50%, but that's no way to mix, and if it's a brush part or other aux or something, it hardly even registers. I've tried using the "Record Level" slider (in Smart Controls > Inspector) and that doesn't help.

    Before I resort to going analog audio and trying a powered DI or something, I thought I'd ask the experts if there are any known issues/suggestions here. Thanks in advance.

  • #2
    I presume it's showing low on any meters in GB?

    Comment


    • #3
      The meters are lower but I'm not sure how much difference is significant in this regard... I grabbed a quick screen showing the meters and waveforms of a rhythm guitar (acoustic, recorded with a mic and DI), vox track (ditto) and the drum part:

      https://dl.dropboxusercontent.com/u/...level-diff.png - faders are all at 0db

      This is a "loud" part, too - I'm playing harder than I usually do on this part, so this is representative of peak levels... Not sure what to make of it except that it's not strong enough to mix well.

      Comment


      • #4
        Hi - having exactly same problems with low input level via USB audio. Did you manage to resolve this, and if so how? Thanks!

        Comment


        • #5
          I don't have a solution to that problem, but an alternative. Pick up EZDrummer2 and use it as a plug-in. You'll LOVE the sounds for recording; they're in an entirely different arena compared to the stock TD-15 sounds. I have no problem getting the proper levels.

          Have fun with it.
          JP
          ATV aDrums & aD5, Pearl Mimic Pro & DIY, eDRUMin 10, Agean R-series Silent Cymbals, Roland Handsonic HPD-20.

          Comment

          Working...
          X