Welcome! If this is your first visit, you will need to register to participate.

DO NOT use symbols in usernames. Doing so will result in an inability to sign in & post!

If you cannot sign in or post, please visit our vBulletin Talk section for answers to vBulletin related FAQs.

Announcement

Collapse
No announcement yet.

clean up in aisle 7

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
    BarT
    Registered Member

  • BarT
    replied
    Put the mesh head in a dishwasher or Oxyclean. Bruce

    Leave a comment:

  • hairmetal-81
    Registered Member

  • hairmetal-81
    replied
    Welcome to the forum, sevanace!


    For the cymbals you can use a thing called '303 Aerospace Protectant'.
    It comes in a spray-can form. Make sure you use a cloth. Apply onto the cloth and then wipe the cymbal-surface with it. Don't apply it directly to the cymbal!


    For the hardware-parts ie. everything that's metal like the rack-tubes, cymbal booms and tom-holders, I have made good experience with simple window-cleaner (...I guess 'WindEx' would be something that you may have available over there) and a roll of common kitchen-paper.


    For the module itself, don't use anything fancy...
    Take a soft cloth, Soak it in water, then wring it so it's merely damp, and wipe off the module. Make sure the cloth is damp, but not wet - there's electronics inside, you know...


    Afterwards, rub the module dry with another (dry) cloth, and you should be good to go!



    HTH


    hairmetal-81
    Registered Member
    Last edited by hairmetal-81; 02-27-14, 05:53 AM. Reason: spelling check

    Leave a comment:

  • sevanace
    Registered Member

  • sevanace
    started a topic clean up in aisle 7

    clean up in aisle 7

    I got a dirty TD-11K set ,what do I use to spruce it up?Anything I should avoid to polish them?What do you folks use and why?
Working...
X