Welcome! If this is your first visit, you will need to register to participate.

DO NOT use symbols in usernames. Doing so will result in an inability to sign in & post!

If you cannot sign in or post, please visit our vBulletin Talk section for answers to vBulletin related FAQs.

Announcement

Collapse
No announcement yet.

How to add inputs to TD-7 ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to add inputs to TD-7 ?

    I have used up all my inputs on my TD-7 Turbo. Can I add more by using another TD-7 or TD-5 and if so how would I do this ?

    ps: I don't want to use a SPD

  • #2
    Yes, you can. Take your second module and two MIDI cables. Connect the MIDI Out of one to the MIDI IN of the other, and vice versa, plug in your pads, assign the sounds, and you're all set. If you're using the second module as a sound source as well don't forget to send your outputs to your mixer, cause MIDI only takes care of note information, velocity, controller info etc, not audible sound.

    Stu


    [This message has been edited by mcconaghy (edited October 06, 2001).]
    "Fry that sound effect, Moriarty, we're having it for breakfast"

    Comment


    • #3
      You can try an old octapad.
      it has 6 inputs.
      Do a search in the forums.

      Good luck.
      ________________
      Roy A.

      Comment

      Working...
      X