Welcome! If this is your first visit, you will need to register to participate.

DO NOT use symbols in usernames. Doing so will result in an inability to sign in & post!

If you cannot sign in or post, please visit our Forum Talk section for answers to frequently asked questions.

Announcement

Collapse
No announcement yet.

Manual for TDW-1 V-Cymbal upgrade

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Manual for TDW-1 V-Cymbal upgrade

    I remember a thread of someone who didn't got a manual after his TDW-1 V-Cymbal Control upgrade. I did. It's not an impressive manual, it's a four page leaf.

    The first page is the most important one. I think. It says "READ FIRST". For that reason I will type it in for you, especially for you who didn't got the manual.


    # If you can erase the settings of your drum kits
    -------------------------------------------------
    After performing the upgrade, use the Initialize operation.
    Press [SETUP] - [F4 (UTIL)] - [F4 (INIT)] - [F4 (INIT)] - [F4 (EXEC)].
    * All internal settings will be lost when you perform the Initialize operation.

    When you use the V-Cymbals, select the preset trigger bank 2.
    1. Press [SETUP] - [F1 (TRIG)] - [F1 (BANK)].
    2. Select the bank "2" by turning the VALUE dial.


    # If you want to keep the settings of your drum kits
    ----------------------------------------------------
    You do not have to save your settings before performing the upgrade.

    After performing the upgrade, recall trigger bank 2's factory presets.
    1. Press [SETUP] - [F1 (TRIG)] - [TOOLS] - [F1 (COPY)].
    2. Select the preset trigger bank 2, and the copy-destination trigger bank.
    3. Press [F4 (COPY)] - [F4 (EXEC)].

    Some instruments in preset drum kits are modified to correspond to the V-Cymbals.
    Recall factory presets for individual drum kits if you need.
    For more information on copying a kit, refer to TD-10 Owner's manual; p.137, right column.

    * When upgrade the original TDW-1 to the "TDW-1 with V-Cymbal Control", ALL DATA will NOT be lost.
    * When install the TDW-1 on the non-expanded TD-10, ALL DATA will be lost.

    - - - - - The end - - - - - - - - - - - - - - - - -

    I hope it's usefull to some of you. I had to read it a couple of times. But now I think I understand.

    If you have detailed questions of which you think they could be mentioned in the manual, send me an e-mail. I'm not daily on this board, but I do read my e-mails. If I can answer the question I will reply it on this board for common usefulness

    Ronald

Working...
X