Welcome! If this is your first visit, you will need to register to participate.

DO NOT use symbols in usernames. Doing so will result in an inability to sign in & post!

If you cannot sign in or post, please visit our vBulletin Talk section for answers to vBulletin related FAQs.

Announcement

Collapse
No announcement yet.

Controlling External MIDI Devices

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • jrcel
    replied
    You can't set midi channels on each pad individualy on any Roland drum module, I am surprised that Roland hasn't done anything about it. You might try finding a midi interface that will allow you do do a channel transpose on a single midi note number.

    Leave a comment:


  • alacrity024
    started a topic Controlling External MIDI Devices

    Controlling External MIDI Devices

    Hey guys, long time no see. I've been going to college full-time, and working five nights a week at a radio station 30 minutes frmo my school, so I've had my hands pretty full, and I recently moved my drums into my dorm room

    Anyway, I'm also taking percussion lessons (I figure I'm a pretty good drummer, but I could be a whole lot better with a little guidance), and my teacher wants to see a 5-minute solo on the V's by next tuesday. No problem.

    However, I thought it'd be nice to hook the kid up via midi to my MC-303 sequencer/soundbank and use a couple of the pd 9's to trigger some pad sounds off of the 303 to make things a little interesting.

    Here's my problem: I plud the miid out on my unexpanded td-10 into the midi in on the 303 and set the v's to send midi on channel 10. So I select my ride, tell it to play midi note 32 or something with a 5 second gate time. Wonderful, it sounds wicked cool, but the problem is that all the other pads in the set trigger notes of their own. How do I keep the rest of the pads from triggering midi??? please help!!
Working...
X