Welcome! If this is your first visit, you will need to register to participate.

DO NOT use symbols in usernames. Doing so will result in an inability to sign in & post!

If you cannot sign in or post, please visit our Forum Talk section for answers to frequently asked questions.

Announcement

Collapse
No announcement yet.

Aux11/12 and ddrum trigger ...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Aux11/12 and ddrum trigger ...

    Hi folks,

    i recently got my TD-8 with ddrum triggers, everything works fine except for the triggers in Aux11/12. I'm using an y-adapter to connect both triggers but the incoming signal at the td-8 is way to low. The settings for all tom triggers are the same, can anybody give me a hint?

    Thanks in advance, Roland

  • #2
    Roland,

    Have you checked the trigger type settings for Aux 1 and 2 on the TD-8 under Settings -> Trig?

    Another thing could be the y-adapter... have you tried to plug one of the triggers directly in the Aux on the TD-8?

    Finally... if nothing works, you can always increase the sensitivity under Settings -> Trig -> Basic

    Rob

    Comment

    Working...
    X