Announcement

Collapse

Technical Posting Guidelines

TECHNICAL DISCUSSION ONLY! DO NOT POST LOUNGE OR PRODUCT DISCUSSION!

Having issues? Please visit our Forum Talk section for answers to frequently asked questions.

See more
See less

vh-12 hi hat provisioning in firmware update 1.10

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • vh-12 hi hat provisioning in firmware update 1.10

    Okay I need some clarification here;

    I noticed in the 1.10 firmware update that there is provisionig for the vh-12 hi hat. Is it fully supported under this firmware update?

    Thanks
    RJ
    TD-9KX 3 X PD-125/ 2 X PD-105/ 4 X PD-85/KD-85/KD-120/KD-8/Cy-5/cy-8/3 X cy12R/C and 1 CY15R 2 X CY14C and a good ol VH-11!

  • #2
    OOPS! forgot to add this is for a TD9-KX
    TD-9KX 3 X PD-125/ 2 X PD-105/ 4 X PD-85/KD-85/KD-120/KD-8/Cy-5/cy-8/3 X cy12R/C and 1 CY15R 2 X CY14C and a good ol VH-11!

    Comment


    • #3
      Good question! You've done the update and VH12 now appears as an alternative on the module?

      Is VH12 available both at SETUP, TRIG, TYPE and also at SETUP, TRIG, ADVNCD, HI-HAT?

      Bruce

      Comment


      • #4
        The VH-12 is not an available trigger type on the TD-9, even after the Version 1.10 update. Sorry.

        Comment


        • #5
          Thanks Drew;

          Okay I'll have another look at the firmware. I noticed in selecting the Hi Hat under "trigger hi hat" there were the vertical calibration markers for both the vh-11 and vh-12 and they did change when I selected between them.

          anyhow, just curious.

          thanks
          RJ
          TD-9KX 3 X PD-125/ 2 X PD-105/ 4 X PD-85/KD-85/KD-120/KD-8/Cy-5/cy-8/3 X cy12R/C and 1 CY15R 2 X CY14C and a good ol VH-11!

          Comment


          • #6
            I'm fairly new to the module, I'll have another look tonight, I may have be interpreting it incorrectly.

            BartT I'll look again at the trigger types and let you know what I see.

            thanks all
            RJ
            TD-9KX 3 X PD-125/ 2 X PD-105/ 4 X PD-85/KD-85/KD-120/KD-8/Cy-5/cy-8/3 X cy12R/C and 1 CY15R 2 X CY14C and a good ol VH-11!

            Comment


            • #7
              Okay, I'm loosing my marbles. I just went over the drum brain again and I cannot find where I found that information. I know I found it and that's why I posted but for the life of me now I can't find it.

              So I must be imagining things or got something mixed up.

              Sorry girls/guys

              RJ
              TD-9KX 3 X PD-125/ 2 X PD-105/ 4 X PD-85/KD-85/KD-120/KD-8/Cy-5/cy-8/3 X cy12R/C and 1 CY15R 2 X CY14C and a good ol VH-11!

              Comment


              • #8
                I checked the trigger types, and could NOT find a vh-12 setting...too bad...
                TD9+6v with Diamond Electronic pads, and cowbell.
                ATH-50m headphones, VEX packs
                not to mention keyboards, guitars, basses, and cats

                Comment

                Working...
                X