Welcome! If this is your first visit, you will need to register to participate.

DO NOT use symbols in usernames. Doing so will result in an inability to sign in & post!

If you cannot sign in or post, please visit our vBulletin Talk section for answers to vBulletin related FAQs.

Announcement

Collapse
No announcement yet.

TD6 Hi gain and compression

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • TD6 Hi gain and compression

    I have been building a sound system for my TD6 and beyond. I started with an Alesis powered mixer rated at 325 watts per side @4 ohms, I also purchased a pair of EV Eliminator i-15 speakers which are rated a 350 - 1400 watts peak. The problem that I am having is when I go past 4 or 5 on the gain I start to get popping from the speakers. It is possible the amp is clipping due to being under powered for the EV's but I was also wondering if I need a compressor due to the wide frequency of Vdrums. I do have a Crown Macrotech 2400 power amp on order which should eliminate the clipping, but should I be running a compressor as well ?
    I know most good quality power amps have built in limiters to prevent clipping and destroying my $1200 set of speakers. The Alesis has a rumble filter to reduce severe lows but unfortunately it is not a quality amp.

    Thanks
    Unified Past
    http://www.unifiedpast.com/unified_past/Home_Page.html

    http://www.youtube.com/user/Vdrummer17


  • #2
    325 watts and your getting clipping .. in the low frequency range I guess ? May mean that you may need a sub woofer (I wouldnt dare running a TD kit without a SUB).

    Adding a compressor might not fixt it if its low frequency related, because compression tends to add more punch to low end sounds.

    I'm not a sound/amp expert, but I noticed from experience that any drum kit I tried souded like crap when not amplified by a balanced digital drum sound system that included a sub. My Yamaha MD50dr kit sounds better (at 50 watts power) than the 300 watts macki kit with 15 inches drivers they were using when I last tried a kit in one of the local drum shops.

    That's my 2 cents

    Comment


    • #3
      So get a pair of subs with a good crossover and send all the lows to them. Man this is getting expensive !
      Unified Past
      http://www.unifiedpast.com/unified_past/Home_Page.html

      http://www.youtube.com/user/Vdrummer17

      Comment

      Working...
      X