Welcome! If this is your first visit, you will need to register to participate.

DO NOT use symbols in usernames. Doing so will result in an inability to sign in & post!

If you cannot sign in or post, please visit our vBulletin Talk section for answers to vBulletin related FAQs.

Announcement

Collapse
No announcement yet.

Dingbat on a td6-SW

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dingbat on a td6-SW

    So my dingbat came in today.

    I tried to set it up on tom2/aux using the same steps here (http://vdrums.com/forum/showthread.php?t=40448) that I used to add another tom, but the dingbat doesn't work.

    Do I need to change the trigger type? If so, what type?

  • #2
    At SETUP, TRIG BASIC; if you scroll through the input heads and rims using Shift and the Left/Right arrows, what appears after T2:H05? It should be AUX:H06 and not T2:R05. If the latter appears, use +/- to change from Rim to PD-8 or PD Type (either of those should be fine for a Dingbat).

    Do you know that the splitter cable you're using for this is OK? Try swapping it with the insert cable you're already using to split Toms 3 and 4.


    Bruce

    Comment

    Working...
    X