Announcement

Collapse

Technical Posting Guidelines

TECHNICAL DISCUSSION ONLY! DO NOT POST LOUNGE OR PRODUCT DISCUSSION!

Having issues? Please visit our Forum Talk section for answers to frequently asked questions.

See more
See less

Sonic Maximizer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • jg52
    replied
    The 482 replaced the 462 and I suspect the 882 replaced the 862. The only difference between the 462 and 482 is a different color on the face plate, at least visually. The headroom of both is +18 dBu. The 882/862 has balanced outputs and headroom of +23dBu.

    I've never run out of headroom using the 462, either with the stereo output of the board or just with the TD 10. The BBe is the best bang-for-the-buck I've ever gotten.

    Hope this helps.

    Jay

    Leave a comment:


  • szvook
    replied
    Unfortunately I donít know about the 862 models. It might be an earlier model. The recent BBE catalog does not mention the 862 (it also does not mention any of their earlier models as well). I would recommend contacting them just to find out what is the 862 compatible with from their current models, or maybe they can steer you in a right direction.

    BBE Brand Product Service and Technical Support: [email protected]

    BBE Sound, Inc.
    5381 Production Drive
    Huntington Beach, California 92649
    USA

    Tel: (714) 897-6766
    Fax: (714) 896-0736

    Good luck.


    ------------------
    szvook

    Leave a comment:


  • drumbeat8u
    replied
    Do you know anything about the 862?
    Originally posted by szvook:
    The 422 will be good enough. The 482 will have more headroom to boost the signal.
    I donít have the specs on the 422, but itís a good way start. The 882 is the higher end unit (for now) if you want to upgrade in the future.

    The 422 specs:

    Applications
    Pro and semi-pro sound reinforcement
    Multitrack studios
    Mobile DJ systems
    Cassette copies
    Nightclub sound systems
    Instrument racks for guitar, bass and keyboards

    Features
    2 channels of process for stereo or separate mono mixes
    5 segment LED output meters
    +18dBu headroom
    RCA and1/4" inputs and outputs
    Hardwire bypass
    Bypass switch for comparison of processed to unprocessed signal

    Specifications
    Frequency Response,
    Process Mode: Program controlled
    Bypass Mode: 10Hz to 50kHz, +/- 0.5dBu, 10dBu input
    Signal to Noise Ratio: 112dB Process IN
    THD, Process mode: less than 0.025% at 20-20kHz
    Bypass mode: less than 0.002% at 20-20kHz
    Maximum Output: +18dBu (may vary due to control settings)
    Input Impedance: 47K Ohms, unbalanced 1/4" phone jack or RCA jack.
    Output Impedance: 1K Ohms, unbalanced 1/4" phone jack or RCA jack.
    Sensitivity: -45dBu for maximum process
    Maximum Process: +12dBu boost at 5kHz, -10dBu input
    Lo Contour: +12dBu adjustment at 50Hz, -10dBu input

    Leave a comment:


  • szvook
    replied
    The 422 will be good enough. The 482 will have more headroom to boost the signal.
    I donít have the specs on the 422, but itís a good way start. The 882 is the higher end unit (for now) if you want to upgrade in the future.

    The 422 specs:

    Applications
    Pro and semi-pro sound reinforcement
    Multitrack studios
    Mobile DJ systems
    Cassette copies
    Nightclub sound systems
    Instrument racks for guitar, bass and keyboards

    Features
    2 channels of process for stereo or separate mono mixes
    5 segment LED output meters
    +18dBu headroom
    RCA and1/4" inputs and outputs
    Hardwire bypass
    Bypass switch for comparison of processed to unprocessed signal

    Specifications
    Frequency Response,
    Process Mode: Program controlled
    Bypass Mode: 10Hz to 50kHz, +/- 0.5dBu, 10dBu input
    Signal to Noise Ratio: 112dB Process IN
    THD, Process mode: less than 0.025% at 20-20kHz
    Bypass mode: less than 0.002% at 20-20kHz
    Maximum Output: +18dBu (may vary due to control settings)
    Input Impedance: 47K Ohms, unbalanced 1/4" phone jack or RCA jack.
    Output Impedance: 1K Ohms, unbalanced 1/4" phone jack or RCA jack.
    Sensitivity: -45dBu for maximum process
    Maximum Process: +12dBu boost at 5kHz, -10dBu input
    Lo Contour: +12dBu adjustment at 50Hz, -10dBu input



    ------------------
    szvook

    Leave a comment:


  • drumbeat8u
    started a topic Sonic Maximizer

    Sonic Maximizer

    Does anyone know the differences between the Sonic Maximizer 422 and the 482? Will the 422 do what a VDrummer needs?
Working...
X