Welcome! If this is your first visit, you will need to register to participate.

DO NOT use symbols in usernames. Doing so will result in an inability to sign in & post!

If you cannot sign in or post, please visit our vBulletin Talk section for answers to vBulletin related FAQs.

Announcement

Collapse
No announcement yet.

Roland CY12 R/C With Alesis nitro module?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Yerpman
    replied
    Originally posted by Tetsuo1981 View Post
    Hi all

    Looking to add a dual zone cymbal to my alesis nitro mesh kit and came across the Roland CY12 R/C. Quite fancy it because it has a bell zone and according to the manual there are 2 outputs, one for bell / bow and one for bow / edge. All I really want is a bow and bell trigger so was thinking I could use a y-split cable from the bell / bow output into the 2 extra inputs on my nitro module and assign the sounds accordingly. Would that work?

    I have no idea about electronic drum kits whatsoever so any help would be greatly appreciated.

    Cheers
    When using Alesis (strike) crash cymbal with Roland modules, head and rim are reversed. I assume that the reverse..Roland into Alesis...will have the same results.

    Leave a comment:


  • Tetsuo1981
    replied
    Originally posted by electrodrummer View Post
    If you get no joy here, ask there:
    https://www.alesisdrummer.com
    Will do, just waiting for my acceptance email. Cheers

    Leave a comment:


  • electrodrummer
    replied
    If you get no joy here, ask there:
    https://www.alesisdrummer.com

    Leave a comment:


  • Tetsuo1981
    started a topic Roland CY12 R/C With Alesis nitro module?

    Roland CY12 R/C With Alesis nitro module?

    Hi all

    Looking to add a dual zone cymbal to my alesis nitro mesh kit and came across the Roland CY12 R/C. Quite fancy it because it has a bell zone and according to the manual there are 2 outputs, one for bell / bow and one for bow / edge. All I really want is a bow and bell trigger so was thinking I could use a y-split cable from the bell / bow output into the 2 extra inputs on my nitro module and assign the sounds accordingly. Would that work?

    I have no idea about electronic drum kits whatsoever so any help would be greatly appreciated.

    Cheers
Working...
X