Announcement

Collapse
No announcement yet.

SPD-SX: Firmware upgrade to 1.08 broke All Sound Off

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • SPD-SX: Firmware upgrade to 1.08 broke All Sound Off

    In my first performance after upgrading to 1.08 from 1.07 I wanted to test the SPD-SX during sound check so I hit pad to trigger a sample. When it worked, I went to kill the sample with the All Sound Off button, and it did NOTHING. I restarted the SPD-SX and same thing happened again. Has anyone else found this after upgrading to 1.08?
    Show Kit: TD-50+TD-17, PD-140DS, PDX-100 (x4), CY-5 (x2), CY-18DR, CY-14C (x2), CY-12C (x2), CY-8, KT-10 (x2), FD-9, BT-1 (x6), SPD-SX, Gibraltar GCS-ERK, QSC K10 & KSub, Yamaha MG10XU, Westone AM Pro 30, Bose QC35, Roc-N-Soc Nitro
    Practice Kit: TD-17, PD-128BC, PD-85 (x4), CY-5 (x3), CY-15R, MDS-TDKP1 folding rack

  • #2
    Turns out the Menu button doesnít work either! Iím going to try to reflash.
    Show Kit: TD-50+TD-17, PD-140DS, PDX-100 (x4), CY-5 (x2), CY-18DR, CY-14C (x2), CY-12C (x2), CY-8, KT-10 (x2), FD-9, BT-1 (x6), SPD-SX, Gibraltar GCS-ERK, QSC K10 & KSub, Yamaha MG10XU, Westone AM Pro 30, Bose QC35, Roc-N-Soc Nitro
    Practice Kit: TD-17, PD-128BC, PD-85 (x4), CY-5 (x3), CY-15R, MDS-TDKP1 folding rack

    Comment


    • #3
      The buttons failures seem to be coincidental and unrelated to the firmware update. I opened up the case and reseated a couple of ribbon cables and that looks to have fixed things. The ribbon cables WERE in place securely but reseating them must have improved the contact.
      Show Kit: TD-50+TD-17, PD-140DS, PDX-100 (x4), CY-5 (x2), CY-18DR, CY-14C (x2), CY-12C (x2), CY-8, KT-10 (x2), FD-9, BT-1 (x6), SPD-SX, Gibraltar GCS-ERK, QSC K10 & KSub, Yamaha MG10XU, Westone AM Pro 30, Bose QC35, Roc-N-Soc Nitro
      Practice Kit: TD-17, PD-128BC, PD-85 (x4), CY-5 (x3), CY-15R, MDS-TDKP1 folding rack

      Comment

      Working...
      X