Welcome! If this is your first visit, you will need to register to participate.

DO NOT use symbols in usernames. Doing so will result in an inability to sign in & post!

If you cannot sign in or post, please visit our Forum Talk section for answers to frequently asked questions.

Announcement

Collapse
No announcement yet.

td 20 fader sensitivity

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • td 20 fader sensitivity

    has there been long term issues with module faders or do i have a set up issue. my 6 yr old td20 volume faders only work in the top upper quarter of there range. the volume goes from not audible to loud over only an 1/8 of an inch movement. i have to bump in micro increments to get proper volume. i have done factory reset a couple times with no change. any ideas please? i was on my acoustic kit pretty exclusively for awhile and dont remember them being that sensitive

  • #2
    i'm sure you tried to set the correct pad in the module and sensitivity on that pad in the module
    TD-20, TD-8, PD-105 X3, PD-125 X 1 , KD-125, MDS-20, CY-12 C/R, PD-6 X4, VH-12, PCY-135, PCY-155...AXIS BASS DRUM PEDAL...COBRA HH STAND...............Vex'd Out To The Max Drummers Dream

    Comment


    • #3
      To be honest i have never been a tech wiz on my set. I assumed a factory reset would make the controls operate in a standard working fashion. My volume faders DO work but only when pushed mostley up . I have briefly read about assigning pads and whatnot but never figured i needed to access those controls unless i was maybe building a custom kit. I do have tdw expansion installed w no issues. All functions perform correct except stated issue. Mixer setting increase and decrease sound master operates and even compression+\- work but faders work only in the abbrieviated range. I can get satisfactory volumes but again bottom 3/4 range is unusable with no volume starting to deliver untill up high

      Comment

      Working...
      X