Announcement

Collapse
No announcement yet.

Roland Trigger Cones Replacement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Roland Trigger Cones Replacement

    I am trying to find PD-125 cone replacement triggers online but I cannot seem to find it anywhere. I live in Dubai and I need to be able to ship it out to the UAE.
    Does anyone here know where I can buy replacement part like these online?

  • #2
    i see this seller on ebay, not my you can try https://www.ebay.com/itm/Sensor-Cush...y/153455335030

    Comment


    • #3
      Try Quartz Percussions: https://www.quartzpercussions.com/pr.../one-foam-cone
      I could tell you where to stick that piezo! ;)
      Stealthdrums.com Mega Kit: Pearl Mimic Pro ,2Box modules,drums and cymbals too many to count. VST quality sounds directly from the Mimic and custom sounds loaded into and played directly from the 2Box modules. Visit me anytime at: http://stealthdrums.com/

      Comment


      • #4
        I bought these from UFO Drums and they work great
        https://www.ebay.com/itm/Foam-Cone-E...72.m2749.l2649
        Roland TD-10 TDW-1
        Roland TD11 & TD-4 connected to A2E SPL with triggered L-80s

        Comment


        • #5
          Hi,
          Drum-tec sells original Roland cone for all PD series : https://www.drum-tec.fr/roland-senso...-pd-85-105-125
          and also for KD 120 and KD-140 : https://www.drum-tec.fr/roland-senso...our-kd-120-etc
          These are not cheap but it's original parts.

          I think they can ship worldwide.

          Comment


          • #6
            Originally posted by Dougi View Post
            I bought these from UFO Drums and they work great
            https://www.ebay.com/itm/Foam-Cone-E...72.m2749.l2649
            wow ... price went up ... i bought the gray versions more than 10 years ago from them, it was like $7/each :P

            Comment


            • #7
              Cones are so ridiculously priced. I just got a foam cutter at work (school) so am going to try my
              hand at it... and then quit my job.

              1. Get foam
              2. Cut foam into cone
              3. Profit

              Comment


              • #8
                But in Europe it's very difficult to find the good foam.
                Closed cell rubber foam works, but it's subject to irreversible deformation and my last try with TD-30 tend to prove that PS don't work good with this kind of foam.
                Poron foam (microcellular open cell foam) is not available in Europe.
                If someone know where to get good foam in Europe (France), I'm very interrested.

                Comment


                • #9
                  I've been meaning to replace the cones on all my TD-20-era pads.
                  This thread was the push that I needed.

                  I went with Quartzpercussions. Thanks JmanWord.

                  Comment


                  • #10
                    Originally posted by Perkussion View Post
                    I've been meaning to replace the cones on all my TD-20-era pads.
                    This thread was the push that I needed.

                    I went with Quartzpercussions. Thanks JmanWord.
                    I hope you read about the adhesive disks Quartz will supply if you ask for them, mentions that on the page about the trigger cones. You will need those for a stock Roland pad as they adjust the height. The tip of the cones need to be above the bearing edge and without those I believe they are too short. I always ask for those.
                    I could tell you where to stick that piezo! ;)
                    Stealthdrums.com Mega Kit: Pearl Mimic Pro ,2Box modules,drums and cymbals too many to count. VST quality sounds directly from the Mimic and custom sounds loaded into and played directly from the 2Box modules. Visit me anytime at: http://stealthdrums.com/

                    Comment


                    • #11
                      Thank you!

                      Comment


                      • #12
                        gonna find out if long and mcquade sells them when i return my rental td-17 next week
                        Roland TD-6v all mesh, kick swapped for KD-85 mesh with iron cobra 900 double pedal, added pintech and yamaha cymbals with drum splitters, and swapped CY-5 hi-hat (now using as cymbal) for an L80 hi-hat with cheap-o trigger with goedrum hi hat controller. EZdrummer2 VST with VEX packs.

                        Comment


                        • #13
                          just ordered this 5 cones, will let you all know when come https://www.ebay.com/itm/Trigger-Pad...e/163503964403

                          Comment


                          • #14
                            I hope you read about the adhesive disks Quartz will supply if you ask for them, mentions that on the page about the trigger cones. You will need those for a stock Roland pad as they adjust the height. The tip of the cones need to be above the bearing edge and without those I believe they are too short. I always ask for those.
                            Thanks Jman. Ordered some cones yesterday from Quartz for my Roland pads and this was exactly the question I needed answered.
                            E-Kits: Roland TD9v1, Yamaha DTX Multi12, Zendrum EXP; FD9, KT10 // Interfaces: Scarlett 2i4, Scarlett 6i6 // Sounds: Superior Drummer 3, Stompblock // Computers: Macbook, imac // Logic, Garageband // Headphones: ATH-M30x // Speakers: Yamaha DBR10, Yamaha HS7s // A-Kits: DIY compact kit, Mapex Meridian // Cymbals: Zildjian Ks, a few As and Sabians, and ...

                            Comment


                            • #15
                              if anyone is in canada i just ordered a replacement cone for my pd-105 from long and mcquade for $10
                              Roland TD-6v all mesh, kick swapped for KD-85 mesh with iron cobra 900 double pedal, added pintech and yamaha cymbals with drum splitters, and swapped CY-5 hi-hat (now using as cymbal) for an L80 hi-hat with cheap-o trigger with goedrum hi hat controller. EZdrummer2 VST with VEX packs.

                              Comment

                              Working...
                              X