Announcement

Collapse
No announcement yet.

VH-12 with TD-15

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • VH-12 with TD-15

    Hi , for the use of vh- 12 with td-15 and I think it will work for all , that have vh-11 option , and the hi-hat control jack is mono, just put a tini trimpot 100k between tip and slive , adjust at 20k then fine tune, and it will work fine, I hope it helps
    Last edited by eduardo.sousa; 02-14-18, 01:19 PM.
    TD-15 , Vh-12, CY8, custom 3 way ride, custom drum shell's with mesh. EC-10 El cajon.

  • #2
    After my last post, I did one more thing to put it work better, I added one plastic ring with 5mm base, on top of the spring but the ring inner hole let the spring top 2 layers pass in it , so it only acts just on top of the end of the resistance, this helps to drop the value more, and now I have all sounds very good, only from middle up its not accurate. in the link is a example video
     
    TD-15 , Vh-12, CY8, custom 3 way ride, custom drum shell's with mesh. EC-10 El cajon.

    Comment

    Working...
    X