Announcement

Announcement Module
Collapse
No announcement yet.

microphone hookup?

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • microphone hookup?

    I have a Mackie Thump amp that I currently have my TD20 hooked up to. I recently purchased a microphone and wanted to also hook up to this amp. Problem is the input on the Mackie is already utilized by the TD20 module. Is there a way to hook up the microphone to the same amp? or will I need to do it another way? thanks.

  • #2
    Looks like you will need a small mixer...like this....

    http://www.musiciansfriend.com/pro-a...30565000000000

    Just hook both the module and the mic to it and you'll be set.
    8 Piece Smokey Chrome/Acrylic w/DIY Pans http://quartzpercussions.com/home_en.html 2BoxDrumIt5x2, DIY Acrylic Spl/Ch, Gen16 Hats/Rides/Ch/Spl, Assorted Gen16 Conversion Cymbals http://www.stealthdrums.com/,DW Remote,SleishmanTwin/QuadSteele Conversion, http://www.drumagination.com/drum-pe...com/mk_pro.php Gibraltar & DrumFrame rack systems
    www.airbrushartists.org/dreamscapeairbrushrealm

    Comment


    • #3
      If you want to keep it on the cheap, I suppose you could run the mic through the MIX IN jack on your module, but that would probably require a DIN to 1/4" TRS plug.
      Id rather be told the ugly truth than handed a pretty lie.

      Comment


      • #4
        Very good, I may go ahead and buy a mixer for it, thanks.

        Comment

        Working...
        X